National Grid has named 76 contractors to a new framework for specialist civil engineering and building work across its electricity transmission and distribution networks. It covers 12 lots, from concrete repairs and masonry to roofing, drainage, scaffolding, building maintenance, surveys and geotechnical services.
For specialist firms, this is not simply another building contract. Work may take place at new or existing substations, across a wide spread of regions, and sometimes at domestic or residential customer premises. Each setting can affect how a contractor describes its work to insurers and what evidence a client expects before a job starts.
The award notice was published on 6 November 2026, with contracts concluded on 1 July. Each lot has an initial five-year term and two possible extensions, of two years and one year, which could take the maximum duration to eight years. The New Civil Engineer report sets out the scope, regions and lot details.
For contractors in London, the South East and East of England, the framework includes areas close to Moyak’s Essex, Kent and London patch. I think the practical point is clear: appointment is a good time to check the insurance arrangements, not proof that the current policy automatically fits every future call-off.
1. Match your declared trade to the work you will actually do
A framework divided into 12 lots brings a wide range of specialist work under one programme. A scaffolding business, roofing contractor, fencing firm and drainage specialist may all face different exposures, even if they are working for the same utility client.
Insurers assess a business based on the activities it has declared, as well as other details such as turnover, work locations and use of subcontractors. If your business wins a place and the work changes or expands, make sure your broker has an accurate description of the work. A contractor taking on substation access work, for example, should not assume an existing description of routine commercial work tells the whole story.
Review the policy wording, schedule and endorsements together. Pay attention to trade descriptions and any limits or exclusions around work at height, excavation, hot work, structural work or particular types of site. A certificate may confirm that a policy exists, but it will not necessarily show all the terms that matter to your specific activity.
This is a sensible moment to review your Construction Contractor Insurance with a specialist. The aim is not to insure against every imaginable event; it is to make sure the insurer understands the work you are asking the policy to cover.

2. Describe the substation environment accurately
Work on an electricity estate can involve site rules and conditions that are different from an ordinary building project. Depending on the task and location, contractors may need to work within defined electrical exclusion zones, follow permit-to-work arrangements, and consider hazards such as induced voltage or buried high-voltage cables.
These examples are not a substitute for the site-specific risk assessment, induction or method statement. They do show why a broad description like “general building work” may not give insurers enough context. Be ready to explain what access is permitted, what controls apply, whether work takes place near operational equipment, and what the contractor is responsible for on site.
Insurance does not replace safe systems of work or the client’s requirements. But accurate disclosure helps your broker approach insurers with a realistic picture of the risk and check how the policy responds. That matters for public liability and contract works, as well as plant and equipment cover where relevant. The details are policy-specific, so do not rely on the name of a cover section alone: check the actual wording and exclusions.
Utility contracts may also specify insurance limits and additional requirements. Those terms need to be checked against your policy rather than assumed to match what you already have.
3. Include work at customer premises in your insurance picture
The framework also includes domestic and residential work at customer premises where required. A contractor whose usual work is inside a substation may therefore occasionally be working in someone’s home or near an occupied property.
That difference is worth telling your broker about. The location, proximity to residents and nature of the work can change the way an insurer assesses a business. It may also affect the practical questions that need answering: will you be entering homes, working in shared areas, handling customer property, or using subcontractors for this part of the work?
Do not leave this detail until a call-off is ready to start. If your existing policy presentation is based only on utility sites or commercial premises, ask whether the customer-premises element is already included and on what terms. Likewise, a firm that normally works in homes should explain any new substation exposure clearly.
For businesses looking for General Contractor Liability Insurance, the principle is straightforward: the cover should reflect the actual work and locations, not just the broad label attached to the business.
4. Revisit values and activities through the contract term
An initial five-year term with extension options can give a contractor a long runway, but it also makes it important to keep insurance information current. Turnover, contract values, the size of jobs, the type of plant used and the mix of work can all change during that time.
At each renewal, tell your broker about material changes. That includes taking on larger call-offs, adding new services, working in new regions, increasing subcontracting or accepting design or professional responsibilities. If you provide surveys, geotechnical services, engineering input or advice, ask whether the work creates a need for professional indemnity cover. Public liability is generally not a substitute for cover responding to professional negligence claims.
Also check how your contract works cover applies to the work in progress, materials and equipment that you are responsible for. The right arrangement depends on the contract and policy wording, so review them together rather than assuming a standard package will fit every project.
A framework appointment is not an insurance certificate. It does not show that the policy remains adequate as the work evolves, and it does not itself satisfy the insurance terms of a particular call-off.

5. Check the evidence before the first call-off
Before work begins, compare the insurance requirements in the executed framework and relevant call-off documents with your policy schedule and supporting documents. Check the required limits, types of cover, policy dates and any specific endorsements or evidence the contract asks for.
The public report on the framework does not set out its detailed insurance requirements, so contractors should obtain and read the contractual documents rather than rely on a general industry benchmark. If a requirement is unclear, ask the client or procurement contact to clarify it, then have your broker confirm whether the current policy meets it.
Keep the evidence accessible. That may include current certificates, schedules and relevant endorsements, alongside renewal dates and records for subcontractors where the contract requires them. Do not wait until mobilisation to discover that a certificate has expired, a limit is short or a policy description does not reflect the work being called off.
The same care applies to subcontractors. Confirm who is responsible for checking their insurance and whether their cover aligns with the work they will perform. A supplier’s certificate can be useful evidence, but the underlying scope and policy dates still matter.
Take the opportunity to review
This framework brings together a broad mix of specialist trades, substantial regional coverage and work in settings that can differ from a typical construction site. For contractors in Essex, Kent and London, the relevant regional lots make it particularly worthwhile to check the details early.
Start with three practical actions: identify the lots and activities relevant to your business; compare the framework and call-off insurance requirements with your policy documents; and tell your broker about any changed work, sites, turnover or responsibilities. If your wider business cover needs reviewing too, commercial combined insurance may be worth discussing as part of the conversation.
A clear review now can help avoid rushed questions at mobilisation. More importantly, it gives you and your broker a better chance to address any gaps or uncertainties before the work starts.